Mains power is noisy - trust Audioquest to dissapate harmful noise
The new PowerQuests address noise linearly to provide class-leading, wide-bandwidth noise reduction (better than -22dB). Who doesn’t want cleaner, quieter power.
The PQ-707’s Linear Noise-Dissipation comprises Differential-Mode filtering (30kHz–1GHz), which addresses asymmetrical noise already present on the utility line or backwashed via electronic appliances and components.
The PQ-707 also has Common-Mode filtering (30kHz–100MHz) to address symmetrical noise, which is typically picked up by the AC Line, Neutral, and Ground leads.
Non-sacrificial surge protection keeps protecting
Most power centers contain a protection device that is effective only once when a catastrophic power surge happens. The Audio Quest PQ505's protection works every time. Nothing to damage with repeated 6000V/3000A input surge tests, which is the maximum that can survive a building’s AC electrical panel.
Transient Power Correction improves your amplifiers impact response
With only 15 amps available in the wall outlet, Audioquest's transient Power Correction provides a current reservoir of up to 45 amps peak on-demand power for any amplifier (up to 25mS), supplying the low-impedance current the amp needs to produce thrilling dynamic contrasts, bass extension, and control.
Extreme Voltage Shutdown
If more than 140VAC is present on the incoming AC line for more than a quarter of a second, the circuit will instantly open a high-current relay that will disengage the AC power from all the PowerQuest AC outlets, activating the red front-panel LED “Overvoltage Protection” warning indicator. Once the event has passed, or the building wiring fault has been corrected, the circuit will automatically re-engage.
Dimensions: 17in W x 3.4in H x 13.4 D (3.5in H with feet)
Weight: 16.7 lbs
Power to All
All North American models provide 12 total AC outlets: 4 High-Current outlets for variable-current amplification components (power amps, powered speakers, A/V receivers, subwoofers, etc.) and 8 Linear-Filtered outlets for constant-current source components (TVs, media-streaming devices, disc players, turntables, preamplifiers, cable boxes, etc.).
Each AC power bank is isolated and optimized for the connected device, enhancing the PowerQuest’s ability to efficiently control the complex interactions of:
- Radio-frequency noise and other induced noises present in the AC power supplied from the utility
- The noise that will be present on and in every AC cord
- The noise that is produced within your system’s components and that “backwashes” into the PowerQuest’s output circuits.
The PQ-707 comes with optional 2RU rack ears and a detachable 2m PowerQuest power cable with a flat-to-wall plug.
RF-Noise Dissipating cable with Semi-Solid Concentric Long-Grain Copper (LGC) Conductors, ZERO-Tech for uncompressed current transients, and RF/ND-Tech for unprecedented Noise-Dissipation (2m; 15amps @120V)
Other Audioquest Powerquest models - comparison chart